Vertical Boat Lifts by Pier Pleasure
Exceeding Expectations
Pier Pleasure strives to exceed expectations. Listening to customers and continually improving products based on that input is a priority at Pier Pleasure. Extra effort is given to remove sharp edges, corners, and other defects. This ensures safety, maintains quality standards, and ensures your satisfaction. Pier Pleasure’s standards for excellence demand high-quality components, such as non-corrosive stainless steel bolts and pins, stainless cables, aluminum sheaves, brass nuts, and aluminum construction. Satisfied customers are a result of quality products and service. Quality products are produced by a skilled workforce using top-line equipment. The experienced, committed workforce at Pier Pleasure takes pride in the products they manufacture. Their ideas, opinions, and recommendations have been an integral part of the development of Pier Pleasure and its products.
Quality and Value
Vertical lifts are excellent in shallow water conditions and when the weight of the boat exceeds 4,000 pounds. In these applications, cantilever lifts lose their mechanical lifting advantage. Our vertical lifts are ideal for applications where the water level changes drastically and where maximum clearance is needed. Our direct vertical rise of 66 inches allows you to keep your boat high and dry without continually moving and adjusting your lift.
Pier Pleasure’s vertical lift models are built to meet your high standards of quality, value, and performance. All of our vertical lifts are standard with non-corrosive stainless steel bolts, stainless cable, and brass nuts, giving you many years of service while maintaining a clean appearance. Thick aluminum sheaves are used to maximize cable life and to ensure lasting performance under heavy use. Our vertical lifts offer rigid diagonal V-bracing on both sides, giving uncompromised strength on-demand when your boat is raised to maximum height. Our V-braced design also allows for non-restricted access to your boat from either side of the lift making it ideal for slip installations.
AL30108V / AL30120V
3000# Vertical Lift shown with Full-Length Vinyl V-Bunk and optional Motorstop.
Available in 108” and 120” Inside Width.
AL40120V-BB / AL50120V-BB
4000# Vertical Lift shown with Full-Length Vinyl V-Bunk. Lift also show with Hemlock Tweed Seamark fabric canopy tarp.
4000# and 5000# Vertical Lifts have formed 2” x 6” load beams that provides an additional 3” in the middle for shallow water clearance.
5000# Vertical lift is standard with AC or DC Lift Tech power unit.
AL60120V-BB / AL70120V-B
6000# Vertical Lift shown with Full-Length Vinyl V-Bunk.
6000# and 7000# Vertical Lift are powered with Lift Tech Winch and Motor Unit. Choose either a 2-button pendant or remote fobs. 110 volt or 24 volts.
6000# Vertical Lifts have formed 2” x 6” load beams that provide an additional 3” in the middle for shallow water clearance.
7000# Vertical Lifts have straight 2” x 7” load beams.
AL80120V-HYD / AL80132V-HYD / AL100132V-HYD
10,000# Vertical Lift shown with Full-Length Vinyl V-Bunk.
All 8000# and 10,000# Lifts are Hydraulic and are operated with remote fobs. 12 volt.