Pier Pleasure -Sectional Docks
We invite you to take a look at our quality workmanship and design. Pier Pleasure goes the extra mile to meet or exceed your expectations. Extra effort is given to remove defects, sharp edges, and corners. This ensures safety, maintains quality standards, and assures your satisfaction.
Our dock systems offer many features and benefits not found in any other dock system. These unique features make them simple to install, level, and remove. Each dock section is designed to hold 60 lbs. of water in its 100% welded frame. This feature adds stability and helps to hold the dock system in place during storms, high winds, and strong wave action. The water is drained by removing the plugs under each section before removal in the fall. The 4' x 8' sections are connected end-to-end and side-to-side by our own unique interlocking hinge. The first sections can form a ramp up or down allowing for formation to any shoreline terrain. For maximum stability, the dock legs are braced from front-to-back and from side-to-side.
Pier Pleasure will never sacrifice quality, performance, durability or customer satisfaction, just to reduce the cost. After all, Pier Pleasure’s name and reputation are on the line. We appreciate your consideration of Pier Pleasure for your lift and dock needs!
Pier Pleasure Features and Benefits
Pier Pleasure’s dock system offers many features and benefits not found in any other dock system. These unique features make them simple to install, level and remove.
- Welded Frame
- Dock Legs Stability
- Top Leveling
- Leg Levels Independently
Each dock section is designed to hold 60 lbs. of water in its 100% welded frame. This feature adds stability during normal use and helps to hold the dock system in place during storms, high winds and wave action. Water is drained by removing the plugs under each section before removal in the fall. This is a great feature!
Available 4’x8′, 5’x8′ and 6’x8′ sections are connected end to end and side to side by Pier Pleasure’s unique interlocking hinge. The first sections can form a ramp up or down allowing the dock system to adapt to any shoreline.
Pier Pleasure’s dock legs are braced from side to side and front to back for maximum stability. There are no leg posts above the dock surface and legs do not need to be removed, which makes installation, removal and storage easier. This also maintains a clean appearance.
Pier Pleasure’s adjustable legs allow leveling from the top of the dock without entering the water. Each leg levels independently and there are no set screws or holes to line up. The leg adjustment mechanism has 18″ of adjustment and carries a full lifetime warranty.
Height indicators on each leg make leveling easy and accurate. The indicators show you the distance from the top of the dock to the water. All bolts, pins, and fasteners in the dock system are stainless steel which means no corrosion, no maintenance, and a long-term clean appearance.
Pier Pleasure’s design flexibility allows unlimited layout options. Additional sections can easily be added later in any location to modify your layout as your needs change.
Pier Pleasure provides buyers the flexibility to design a layout that best fits their needs. An unlimited number of layouts can be created to meet any taste or desire. Design a slip for your boats or a large platform with plenty of room to share fun times with your family and friends. Whatever the case, get off the deck and make memories on your dock.
Pier Pleasure Dock Formations
Popular Dock Formations
Layouts shown with 4′ x 8′ dock sections and optional corner sections.
Unique Dock Formations
Some dock layouts are shown with the optional corner section.
Dock Installed and removed by one person without entering the water!
- Carry the dock frame out onto the dock. 4′ x 8′ section frames with legs weigh 65 lbs.
- Connect dock sections using Pier Pleasure’s unique, interlocking hinges.
- Lower the section into the water with the use of a rope. No bolts, pins or tools are needed to connect dock sections.
- Install panels into the dock frame.
- Level section with the use of the adjustment crank. Level indicators on the side of each leg show you when you have reached your desired height.
- Add water to the tubular frame for additional weight and stability.
- Install dock accessories wherever you choose. Spaces between deck planks allow you to install accessories without the need to drill unsightly holes.
- After the accessories are removed and water is drained, remove dock frames with the optional tripod winch. Carry frames and stack onshore for storage.
Additional Features & Dock Surfaces
Our sectional dock systems design flexibility allows for virtually unlimited layout options and additional sections can be easily added at any time to customize your dock layout to fit your needs as they change.
